
In-ground pool builders in Temecula, CA
A new inground pool is a permitted construction project. This page connects you with a licensed pool builder who designs it, pulls the permit, and builds it under their own license. It is a referral, not an offer to build one.
Parts of an inground pool
A hillside on the left is held by a retaining wall. The pool shell sits in the ground, with gravel and steel under the floor, water filled to just below the coping, and steps at the right end. Plumbing runs to a pump, a filter, and a control panel on an equipment pad.
- Retaining wallHolds the cut hillside.
- WaterFilled to just below the coping, with steps at one end.
- Pool shellGravel and steel under the floor.
- PlumbingRuns from the pool to the pump.
- Equipment padPump, filter, and a control panel.
Start a free request
Pick what you need. Five short questions.
What this page covers
Swimming pool installation in Temecula, for a new inground pool in gunite or concrete. The builder's written price is the offer. Figures below are contractor estimates for planning.
The City of Temecula requires a permit for pools, spas, and hot tubs. Ask who pulls it, and ask that it be in the builder's name. Rules are different in Murrieta and in French Valley. The full write-up is the permit guide, and the permit comparison guide lines up the Temecula and French Valley rules side by side.
Before you compare prices, read how to check the license. California requires the license number on the builder's advertising, and the person who sells the contract needs a home improvement salesperson registration.
What contractors publish for cost and time
Two contractor pages are the price sources. No city price survey was found.
Premier Pools and Spas' Temecula page says a pool alone starts around $60,000, and that the job takes 4 to 5 months in total.
Bogner Pools' 2026 Inland Empire guide, for Riverside and the Inland Empire and not a Temecula-only survey, says a straightforward custom pool runs $60,000 to $80,000, and that most custom pools take about 12 to 16 weeks.
Read together, those estimates support about $60,000 to $120,000 for most new inground pools in the Temecula area, before extras. A spa, rock, or a retaining wall adds more. The schedules do not match: 4 to 5 months on one page, about 12 to 16 weeks on the other. Use the cost guide for the spa, rock, and wall figures, and ask the builder who prices your job which clock they mean.
Questions worth asking before you sign:
- Is the price for gunite or concrete, and what is included?
- Who pulls the Temecula permit, and in whose name?
- What happens to the price if the builder hits rock?
- Is a spa, a retaining wall, or a heat source included?
If the builder hitting rock or pricing a retaining wall sounds like your lot, read pools on slopes and rock before you compare written prices. On a tight lot, the city's setbacks and the equipment pad can limit the shape before price does; see what pool fits a small backyard in Temecula.
How does pool installation work in Temecula?
Pool installation in Temecula follows a fixed order, not a pace you can set by starting earlier. The builder designs the pool, then submits two sets of plans and structural calculations, stamped and signed by a registered civil or structural engineer, for the city's plan review. The City of Temecula's rule for the work itself is direct: "Permits are required before any excavation work can begin on the job site." Once the permit is issued, a temporary fence and gate has to already be up, since the city's Swimming Pools and Spas Handout requires one "upon commencing pool construction." The first scheduled inspection is a pre-construction meeting with the homeowner and contractor present. From there, inspections continue at each stage before it gets covered up, and the pool and spa lights have to be on site, wired, and ready by the pre-plaster inspection. The permanent safety enclosure, a fence and self-closing, self-latching gate at least five feet high under Temecula Municipal Code 15.04.020(R), is one of the two required drowning prevention features and has to be up and inspected before final sign-off. A lot inside a homeowners association needs that association's own plan approval too, on top of the city's steps.
Inground pool questions
Is the $60,000 to $120,000 range your price?
No. It summarizes two contractor estimates, one from a Temecula builder page and one from a 2026 Inland Empire guide. It is not an offer. The builder you hire writes the price.
How long does construction take?
The Temecula contractor page says 4 to 5 months total. The Inland Empire guide says about 12 to 16 weeks for most custom pools. Ask the builder which parts of the job that includes.
Who pulls the permit?
Temecula requires a permit for a pool. A licensed pool builder should pull it. This site does not pull permits and does not do the work.
Does this cover resurfacing an existing pool?
No. These are new construction figures. See pool remodeling and resurfacing and pool resurfacing cost in Temecula for a pool you already have.
Who are the best in-ground pool builders in Temecula?
This site does not rank or name builders. Start by confirming the contractor holds an active C-53 Swimming Pool Contractor license and that the person who sells the contract has a home improvement salesperson registration. See how to choose a pool builder in Temecula for the full checklist, then compare at least one written price.
How do I find pool contractors in Temecula?
Call or send a request through this site and we pass it to one licensed pool builder who serves Temecula, Murrieta, and French Valley, at no cost to you. Confirm the license, the Temecula permit, and whether rock, a slope, or an HOA review changes the job before you sign anything.
Related guides
Talk with a licensed pool builder
Call, or send a request with your address. We pass your request to a licensed pool builder who serves Temecula, Murrieta, and French Valley, if one is available. Say whether you want a new pool, a spa, or work on a pool you already have.